Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
<
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
Quality Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance factory
>

Hydrogen Gas Powered UAV with 9-hour Flight Duration 40 kg Payload and High-altitude Reconnaissance

Place of Origin: China

Product Details


Layout: VTOL Fixed-wing Form Of Energy: Hydrogen Fuel Cell
Empty Weight: 32 Kg Max Payload: 8 Kg
Maximum Take-off Weight: 40 Kg Wingspan: 4m
Height: 0.6 M Length: 2.4 M
Cruising Speed: 22 M/s Climbing Speed: 5m/s
Maximum Flight Speed: 35 M/s

Product Description

Hydrogen Gas Powered UAV with Fuel Cell
Q30 Composite Wing UAV
Powered by hydrogen, the Q30 composite-wing UAV provides 9 hours of flight duration, tripling the inspection coverage distance of traditional models per single flight. Rapid refueling also significantly shortens the maintenance cycle. It is capable of high-altitude reconnaissance, line inspection, and relay communication. A dedicated equipment compartment allows it to carry various onboard payloads such as spectral imaging instruments, infrared cameras, visible light cameras, and laser radars. This enables multi-purpose use of one aircraft with strong scalability.
Technical Specifications
Parameter Value
Layout VTOL fixed-wing
Form of energy Hydrogen fuel cell
Empty weight 32 kg
Max payload 8 kg
Maximum take-off weight 40 kg
Wingspan 4 m
Height 0.6 m
Length 2.4 m
3 kg payload flight time 9 h
Cruising speed 22 m/s
Climbing speed 5 m/s
Maximum climbing angle
Maximum flight speed 35 m/s
Minimum flight speed 18 m/s
Max operating altitude 4000 m
Wind resistance Level 6
Operating temperature -20℃ ~ 45℃
Storage temperature -20℃ ~ 60℃
Rain-proof Light rain
Deployment time 5 min
Stowing time 5 min
Secondary response time 3 min
Ground station / integrated Ground control station graphic and data screen
Line-of-sight distance (optional) 20 km / 50 km / 100 km
X120 Heavy-lift UAV
The X120 hydrogen-powered heavy-lift UAV uses a self-developed high-power fuel cell system and efficient power transmission. Its energy density is 3 to 5 times that of lithium batteries. With a 40 kg payload, it delivers both long endurance and heavy load capability, avoiding frequent charging stops for higher efficiency. It suits heavy transport, large inspection, emergency firefighting, and environmental monitoring. The X120 can replace some manned aircraft operations and fills gaps that lithium battery drones cannot.
Technical Specifications
Parameter Value
Power system Hydrogen power system
Maximum take-off weight 137 kg
Maximum payload 40 kg
Unfolded dimensions 1.6 m * 1.7 m * 0.78 m
Mission radius 10-26 km
Flighting speed 10 m/s
Climbing speed 3 m/s
Endurance (Standard: two 20L@35MPa gaseous hydrogen tanks) Full load: 45 min
No load: 70 min
Service ceiling 3000 m
Wind resistance Level 6
Protection rating IP54
Operating temperature -10℃ ~ 40℃
Storage temperature -40℃ ~ 60℃
Rain-proof Moderate rain
Deployment time 3 min
Stowing time 3 min
Secondary response time 1 min
Take-off & landing method Fully autonomous / GPS-assisted stabilization
RTK position accuracy (with good GNSS signal) RTK enabled: ±100 mm (horizontal), ±100 mm (vertical)
RTK disabled: ±600 mm (horizontal), ±300 mm (vertical)
Command control One-key take-off, return-to-home, landing, and route execution
Protection measures Lost link return-to-home, low voltage abnormal return-to-home

Product Highlights

Hydrogen-powered UAVs with 9h+ flight time, 40kg max payload, and rapid refueling. Ideal for inspection, transport, and emergency operations with superior endurance vs lithium batteries.

Related Products
Quality 2-Ton Payload Long-Endurance Turboprop Transport UAV with 1000km Range and 800m Runway Requirement factory

2-Ton Payload Long-Endurance Turboprop Transport UAV with 1000km Range and 800m Runway Requirement

SUNNY-T2000: 2-ton class turboprop cargo UAV with 1000km+ full-load range, 15m³ cargo hold, and 800m runway requirement. Features all-weather operation, precision airdrop, and satellite BVR communication. Ideal for trunk logistics, emergency resupply, and defense missions with low operational costs and mass-production capability.

Quality MD-200 Tilt Turbojet VTOL UAV with 240 km/h Maximum Speed, 120kg Payload Capacity, and All-Weather Operation factory

MD-200 Tilt Turbojet VTOL UAV with 240 km/h Maximum Speed, 120kg Payload Capacity, and All-Weather Operation

MD-200 Tilt Turbojet VTOL UAV combines vertical takeoff/landing flexibility with 240km/h cruise speed. Carries 120kg payload for 2.5 hours, operates in grade 7 winds and all-weather conditions. Uses jet kerosene for fast refueling, ideal for cargo transport, emergency rescue and industrial inspection.

Quality Suspended Rail Charging Station with 80×60×6000 mm Rail Size, 100kg/m Payload, and 180A Max Current for Large Carports factory

Suspended Rail Charging Station with 80×60×6000 mm Rail Size, 100kg/m Payload, and 180A Max Current for Large Carports

Suspended rail charging station with 180A max current & 100kg/m payload. Moves to vehicles, reducing wait times & costs. Supports V2G & costs less than fixed stations.

Quality TCCC Battlefield Rescue Standard First Aid Kit with 600D/1000D High-Density Waterproof Fabric and Modular Hanging System factory

TCCC Battlefield Rescue Standard First Aid Kit with 600D/1000D High-Density Waterproof Fabric and Modular Hanging System

Full series of tactical first aid kits, rescue sets & medical equipment for civilian, outdoor, security & battlefield use. TCCC-compliant, Defense-grade durable materials, rapid hemostatic technology. Complete export certifications, OEM/ODM customization & global bulk procurement support.

Request A Quote

Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.

You can upload up to 5 files and Each file sized 10M max.